Hi!
I'm making manual tests here.
If I press "Pause testing" and then "Step forward by single bar(Space)",
it goes slow on higher timeframes. On 1D timeframe it takes 35 seconds to draw next candle.
On 1M timeframe it works good.
What I'm doing wrong? On FT 2.9 it is going fast.
With regards
SP
FT 3.0 Step forward by single bar(Space) acting slow
-
- Posts: 4
- Joined: Fri Feb 19, 2016 9:28 am
-
- Posts: 1479
- Joined: Mon Apr 01, 2013 3:55 am
Re: FT 3.0 Step forward by single bar(Space) acting slow
Hello
Please try to do the following to speed up the program and fix the issues:
1. Always launch the program as administrator (right-click the Forex Tester icon -> run as administrator).
2. Remove all indicators instances that you do not need at the current moment.
For example, you may have 2 MA on 2 timeframes (let’s say on M5 and M15) of one chart. Each of these MA instances will be calculated separately, so it is recommended to remove all indicators that you do not need at the current moment and leave the indicators only on the timeframes which you use. In this case our program will need less time to load the project.
3. Check that no automatic strategies are running at this moment, or just turn off strategy execution ("Testing -> Enable/Disable Strategy execution" menu).
4. Create a new project and use the "Generate ticks by OHLC points" option.
5. Perhaps some of your data files were corrupted. Try to delete the data using the “Clear history” button and then download it from Data Center again.
6. Attempt to decrease the value in the “Tick package size” drop-down menu.
Please try to do the following to speed up the program and fix the issues:
1. Always launch the program as administrator (right-click the Forex Tester icon -> run as administrator).
2. Remove all indicators instances that you do not need at the current moment.
For example, you may have 2 MA on 2 timeframes (let’s say on M5 and M15) of one chart. Each of these MA instances will be calculated separately, so it is recommended to remove all indicators that you do not need at the current moment and leave the indicators only on the timeframes which you use. In this case our program will need less time to load the project.
3. Check that no automatic strategies are running at this moment, or just turn off strategy execution ("Testing -> Enable/Disable Strategy execution" menu).
4. Create a new project and use the "Generate ticks by OHLC points" option.
5. Perhaps some of your data files were corrupted. Try to delete the data using the “Clear history” button and then download it from Data Center again.
6. Attempt to decrease the value in the “Tick package size” drop-down menu.
-
- Posts: 4
- Joined: Fri Feb 19, 2016 9:28 am
-
- Posts: 1479
- Joined: Mon Apr 01, 2013 3:55 am
Re: FT 3.0 Step forward by single bar(Space) acting slow
Hello
Please right-click on a toolbar in the Forex Tester 3 program and activate "DebugToolBar" option to restore these buttons.
Please right-click on a toolbar in the Forex Tester 3 program and activate "DebugToolBar" option to restore these buttons.
Who is online
Users browsing this forum: No registered users and 24 guests